Pro VS. Backyard Cornhole Boards

---

Our Pro Style cornhole boards are regulation size  2'x4' with a 6" rounded over hole  for smooth bag entry. When the boards are set-up for playing the front of the boards are 3 3/4" from the ground to the top of the playing surface while the back is 12" from the ground to the top of the playing surface.  

-The frames are manufactured with 1"x4" premium pine. This select pine is the highest quality pine available, reducing unsightly knots. To add strength to the frames dado joints, glue and pocket hole construction is used. 

-Pocket holes allow for underside mounting of frames eliminating visible screw holes for aesthetic purposes as well as to avoid interference with the playing surface. 

-Carry handles are cut into each side rail for easy transport and a center brace is installed to add support and reduce any bag bounce on the playing surface. 

-All edges of the frames and handles are rounded over to prevent sharp edges and give  the boards a more finished look.

-The legs are secured to the frames with connector bolts with a brace added between the legs for more stability. 

-A three quarter inch, cabinet grade, birch plywood is used for the playing surface. This high strength plywood provides a smooth surface that allows for a consistent playing experience. 

-Lastly your personalized vinyl wrap is applied to the playing surface and all edges of the vinyl are sealed for extra protection. 

Our Backyard Style cornhole boards are regulation size 2'x4' with a 6" rounded over hole for smooth bag entry. When the boards are set-up for playing the front of the boards are 3" from the ground to the top of the playing surface while the back is 12" from the ground to the top of the playing surface. 

- The frames are manufactured with 1"x3" pine.

-Frames are constructed using pocket holes, allowing for underside mounting of the frames. Pocket holes allow for underside mounting of frames eliminating visible screw holes for aesthetic purposes as well as to avoid interference with the playing surface. 

-Half inch maple plywood is used for the playing surface. 

-Playing surface edges are rounded over to prevent sharp edges and give  the boards a more finished look.

-1"x3" pine is used for the independent legs. 

-Lastly your personalized vinyl wrap is applied to the playing surface and all edges of the vinyl are sealed for extra protection.